Skip to main content

For accurate pricing and the best experience, please enter your ZIP code.

Dashboard Lights

COOLANT TEMPERATURE WARNING

What’s does the coolant temperature warning light mean? Indicates engine temperature has exceeded normal limits.  Turn off the vehicle immediately and have it towed to TD.
What we do? FREE inspection of your vehicles coolant system. This includes testing the coolant fluid for contaminates, visually inspect hoses, radiator, and reservoirs. We will provide you with a comprehensive inspection sheet with a courtesy estimate.

OIL PRESSURE WARNING

What’s does the oil pressure warning light mean? Oil pressure has dropped below the factory recommended level.  Turn off the vehicle immediately and have it towed to TD.
What we do?   Perform a FREE inspection of your vehicle, this includes visually inspect seals, gaskets, filter, and drain plugs for leaking. We will measure the oil level of your vehicle, and top off as needed too!

LAMP OUT

What’s it mean when my lamp light is on? Indicates that there is an exterior light on the vehicle that is not functioning properly.
What we do?   Perform a FREE inspection of your vehicles exterior lights (headlights, fog lights, directional indicators, reverse lights, and brake lights). We will provide a comprehensive exterior light inspection sheet and a courtesy estimate.

TPMS:TIRE PRESSURE MONITORING SYSTEM

What does the tire pressure light mean? The tire pressure has dropped below recommended levels. If the TPMS light is flashing, the TPMS sensor may require replacement, or there could be a fault in the system.
What we do?   FREE pressure check and adjust the tire pressure for FREE. Woot! If TPMS replacement is required we will provide a courtesy estimate on replacement.

BRAKE SYSTEM

What does my brake light mean? RED Indicates one of three possible conditions: parking brake is on/engaged; problem with the braking system/brake fluid is low, or ABS failure. YELLOW indicates your braking components require service.
What we do? Perform a FREE brake inspection. This includes measuring brake pad and rotor/drum thickness, testing brake fluid for contamination, and full braking system inspection. We will provide a comprehensive brake inspection sheet and courtesy estimate.

WASHER FLUID REMINDER

What does my washer fluid light mean? Indicates windshield washer fluid is low.
What we do?   Perform a FREE inspection of your washer fluid reservoir and hoses, then top off the washerfluid FREE.

BATTERY/CHARGING ALERT

What does the battery light mean? Indicates voltage level is below normal level and the vehicle's charging system may not be functioning properly.
What we do?  Perform a FREE inspection of your vehicle battery and electrical system. This includes a FREE battery test. We will provide you with a comprehensive inspection sheet and a courtesy estimate.

WHAT DO THE COLORS OF THE WARNING LIGHTS MEAN?

Red - Critical, Failure, Stop Orange - Warning, Maintenance, Caution Green - Standard, Operation, Information

GAS TIPS

  1. Don’t let your tank get below 1/4 of a tank.
  2. Don’t exceed the speed limit.
  3. Accelerate slowly.
  4. Don’t hard brake.

WHAT DOES THE ARROW NEXT TO THE GAS PUMP MEAN?

The arrow next to the gas pump tells you which side of the car your tank is on. Pump. Pump it up.


Image
Dashboard Lights

The speed rating of a tire is based on U.S. Government standards for reaching and sustaining a specified speed. Typically, a tire with a higher speed rating results in better handling. Speed ratings apply only to the tire itself, and not to a particular vehicle. Putting a tire rated for a certain speed on a vehicle does not mean that the vehicle can be safely operated at the tire's rated speed.

The load range on a tire helps determine its ability to contain air pressure and its overall strength. Ranges are expressed using a number and the higher the number, the stronger the tire. These measurements are primarily for light trucks and SUV’s.

Tread depth is the distance between the top of the tread rubber to the bottom of the tire's deepest grooves.  In the United States, tread depth is measured in 32nds of an inch.

A tire’s maximum load is the maximum amount of weight the tire is designed to hold. The tire’s load carrying capacity is directly related to the tire’s size and amount of inflation pressure that is actually used. Each load range has a assigned air pressure identified in pounds per square inch (psi) at which the tire's maximum load is rated.

The total width of the tire, including any raised features on the sidewall. 

This is how many layers of rubber and other materials are in the tire.  

The measurement, in inches, from rim flange to the other rim flange. 

The maximum width of a wheel that a tire can be put onto. 

The minimum width of a wheel that a tire can be put onto.  

A tire's section width (also called "cross section width") is the measurement of the tire's width from its inner sidewall to its outer sidewall (excluding any protective ribs, decorations or raised letters) at the widest point. 

What makes up a tire; each ply, the sidewall, the tread, and bead.  

This number will tell you how well the tire will disperse heat buildup. 

This is how much weight a tire is rated to hold.

A tire’s maximum inflation pressure (PSI) is the highest "cold" inflation pressure that the tire is designed to contain. When measuring a tire’s max PSI, it is important the tire is "cold," because warmer temperatures can cause the tire pressure to temporarily increase resulting with inaccurate readings. This measurement should only be used when called for on the vehicle’s tire placard or in the vehicle’s owners manual.

The mileage warranty of a tire indicates the number of miles that a tire is estimated to last. If a tire fails to last for the number of miles indicated by the warranty, the customer will be given credit from the tire manufacturer toward a new tire based on how many miles short of the estimate the tire fell. Some restrictions apply. 

TD will repair flat tires as long as it can be done safely in accordance with Tire Industry Association (TIA) Guidelines.  Excludes: Under 40 series, run-flats, mud tires, trailer tires, off-road vehicles, and any tire over six (6) years old.  Other exclusions may apply.  See store for details.  


National accounts and local fleet not included.

Free Alignment with 4-Tire Purchase

National accounts not included.  Other exclusions may apply.

Our Nationwide Worry Free Guarantee offers FREE unlimited Tire Repairs for the entire life of your tires. If your tire can't be fixed and is over 3/32" tread, no worries, we will give you a replacement tire at any time, up to 3 years. We'll even help get your tire changed by including reimbursement for Roadside Assistance (up to $75) for the first 12 months at no additional cost. Effective: August 24, 2017. For complete details, see our warranty at any Tire Discounters location.

Components of the Tire Pressure Monitoring System (TPMS) sensor wears over time.

A TPMS Service Kit is suggested each time a tire/wheel is serviced. If left unchanged, over time, these components of the TPMS may corrode, leak or fail.

Tire/wheel service is defined as when tire is removed from the wheel.

The represents the smallest and widest size wheels that are recommended by the tire manufacturer for the tire to be mounted on. 

 

 

Mounting & Balancing  $76

Lifetime Rotation and Balancing $600*

Lifetime Tire Pressure Adjustments $16

Rubber Valve Stems $8

Tire Repair**  $100

TOTAL = $800


*Estimate based on 4-tire purchase of 60,000-mile tires. 

**Excludes: Under 40 series, run-flats, mud tires, trailer tires, off-road vehicles, and any tire over six (6) years old.  Other exclusions may apply.

Mounting & Balancing  $76

Lifetime Tire Pressure Adjustments $16

Rubber Valve Stems $8

Lifetime Rotation $240

Total = $340

*Estimate based on 4-tire purchase of 60,000 mile tires.